|
|
| |
How to Use
this Selection Guide
- All covers are equally
suitable for mains or low voltage fittings. It is only necessary
to know the cut-out size and the height of the fitting.
- Select the cut-out size
of the fitting in the left hand column.
- Read across to the right
hand column that contains the height of the fitting concerned.
Always select the exact height, or move up to the next size.
For example: a cover for a fitting with a 98mm cut-out and a height
of 95mm is required. In the left hand column you will see that
the nearest cut-out size is 100mm; reading across the right hand
columns, you will note that the AFF109/150 is not suitable, the
83mm size shown for the AFF109/200 is too small and the 136mm
shown for the AFF109/250 is too large. You should select the larger
size, AFF109/250.
PLEASE NOTE: IF YOUR FITTING
SIZE IS SHOWN IN THE ORANGE SHADED AREA, THE COVER CAN ONLY BE INSTALLED
FROM ABOVE THE CEILING. THE COVER WILL NOT FIT THROUGH THE CUT-OUT
HOLE.
|
|
