Ei169/160 Hard Wired Alarm Kit for the Deaf & Hard of Hearing

  • Contains:
    • Flashing strobe light
    • Plug-in vibrating pillow pad
  • Mains powered with rechargeable battery back up
  • Hard wired interconnect

Product Description

The Ei169/160 is a mains powered with rechargeable battery back up, alarm kit for the deaf and hard of hearing. The kit contains a strobe light and vibrating pillow pad that will activate when the interconnected alarms are triggered to alert the user to the danger. The Ei169/160 has an additional jack plug for adding an extra vibrating pillow pad or strobe.

The Ei169/160 kit is compatible with the 3000Multi-Sensor Fire Alarm Ei2110e160e Series alarms and 140RC Series smoke and heat alarms, along with any interconnected Carbon Monoxide alarms. This kit links into the alarm system using a hard wired interconnection. Alarm Kits for the Deaf and Hard of Hearing, that connect into the system wirelessly are also available.

 

Operation of the Ei169/160

 

  • When the smoke or heat alarms in the system activate, the strobe will flash and the vibrating pillow pad will vibrate
  • The green light will illuminate to show power is present
  • Pressing the ‘Test’ button on the side of the unit will cause the flashing strobe and vibrating pillow pad to activate

Technical Specification

  • 230V AC Mains powered with built-in rechargeable Lead-acid battery capable of lasting up to 7 days in standby mode and has a 5 year lifespan.
  • Mains transformer, hardwired to the strobe unit by 4m of low voltage cable, and 2m of mains cable to the 13A plug.
  • Supplied with 10m of low voltage cable to link between the strobe unit and the interface pattress (supplied and to be mounted behind a 3000, 2110e, 160e, 140RC Series alarm).
  • Tamper-proof battery compartment.
  • Green power indicator light – On constantly to confirm integrity of mains power supply.
  • When on battery only power, the red indicator light will flash.
  • Fault indicator – The strobe will flash if a fault is detected (e.g. A break in the cable linking to the alarm or a break in the cable to the vibrating pillow pad).
  • Manual ‘Test’ button checks the strobe and vibrating pillow pad.
  • The strobe uses an intense Xenon tube – Flashes once per second (1Hz).
  • The vibrating pillow pad has a locking socket (JST type VHR-2N) with 5m of cable. Output is pulsed in alarm state. The cable is monitored, if the part is not connected or damaged the strobe will flash.
  • The strobe unit has an additional socket for adding an Ei174 additional vibrating pillow pad or Ei178 additional strobe (not supplied).
  • Clock input socket (requires a 5 to 24V input -electrically isolated from the mains supply). A compatible alarm clock can be connected to this input socket with a 3.5mm mono jack plug. When the alarm clock triggers, the vibration pad activates, but the internal strobe or auxiliary output are not activated (to indicate to the person that it is an alarm clock activation and not a fire activation).
  • Supplied with fixing screws that are suitable for wall mounting.
  • Operation temperature range: 4°C to 40°C. 0% to 90% relative humidity.
  • Dimensions: Control Panel – 105mm x 165mm x 50mm, Transformer – 60 x 70 x 50mm. Weight inclusive of packaging: 1986g.
  • 5 year guarantee.
  • Made in Ireland.

Downloads

Ei169/160 Data Sheet

Download

Ei169/160 Instruction

Download

The Ei169/160 is a mains powered with rechargeable battery back up, alarm kit for the deaf and hard of hearing. The kit contains a strobe light and vibrating pillow pad that will activate when the interconnected alarms are triggered to alert the user to the danger. The Ei169/160 has an additional jack plug for adding an extra vibrating pillow pad or strobe.

The Ei169/160 kit is compatible with the 3000Multi-Sensor Fire Alarm Ei2110e160e Series alarms and 140RC Series smoke and heat alarms, along with any interconnected Carbon Monoxide alarms. This kit links into the alarm system using a hard wired interconnection. Alarm Kits for the Deaf and Hard of Hearing, that connect into the system wirelessly are also available.

 

Operation of the Ei169/160

 

  • When the smoke or heat alarms in the system activate, the strobe will flash and the vibrating pillow pad will vibrate
  • The green light will illuminate to show power is present
  • Pressing the ‘Test’ button on the side of the unit will cause the flashing strobe and vibrating pillow pad to activate
  • 230V AC Mains powered with built-in rechargeable Lead-acid battery capable of lasting up to 7 days in standby mode and has a 5 year lifespan.
  • Mains transformer, hardwired to the strobe unit by 4m of low voltage cable, and 2m of mains cable to the 13A plug.
  • Supplied with 10m of low voltage cable to link between the strobe unit and the interface pattress (supplied and to be mounted behind a 3000, 2110e, 160e, 140RC Series alarm).
  • Tamper-proof battery compartment.
  • Green power indicator light – On constantly to confirm integrity of mains power supply.
  • When on battery only power, the red indicator light will flash.
  • Fault indicator – The strobe will flash if a fault is detected (e.g. A break in the cable linking to the alarm or a break in the cable to the vibrating pillow pad).
  • Manual ‘Test’ button checks the strobe and vibrating pillow pad.
  • The strobe uses an intense Xenon tube – Flashes once per second (1Hz).
  • The vibrating pillow pad has a locking socket (JST type VHR-2N) with 5m of cable. Output is pulsed in alarm state. The cable is monitored, if the part is not connected or damaged the strobe will flash.
  • The strobe unit has an additional socket for adding an Ei174 additional vibrating pillow pad or Ei178 additional strobe (not supplied).
  • Clock input socket (requires a 5 to 24V input -electrically isolated from the mains supply). A compatible alarm clock can be connected to this input socket with a 3.5mm mono jack plug. When the alarm clock triggers, the vibration pad activates, but the internal strobe or auxiliary output are not activated (to indicate to the person that it is an alarm clock activation and not a fire activation).
  • Supplied with fixing screws that are suitable for wall mounting.
  • Operation temperature range: 4°C to 40°C. 0% to 90% relative humidity.
  • Dimensions: Control Panel – 105mm x 165mm x 50mm, Transformer – 60 x 70 x 50mm. Weight inclusive of packaging: 1986g.
  • 5 year guarantee.
  • Made in Ireland.

Ei169/160 Data Sheet

Download

Ei169/160 Instruction

Download

Can't find what you're looking for?

Email support@aico.co.uk for more information